Blazers Heat Logs (Briquettes)

£9.45£475.00 inc. VAT

  • High calorific value 5.5 KWh/kg
  • Each pack contains at least 55kW of energy. Equal to 5.0 p/kW (at full pallet rate)
  • HETAS approved fuel
  • DECC RHI BSL Suppliers Authorisation BSL0032359-0001
  • 1000 kgs of Blazers are equivalent to 4-5m3 of seasoned hardwood (and Blazers are probably cheaper!)
  • No energy wasted burning off unwanted moisture content
  • No dangerous sparks due to good combustion
  • UK produced from sustainable forestry
  • Less tar and cleaner flues
  • Easy and clean to handle
  • Ideal for wood burning stoves , open fires and chimeneas
  • Full pallet 98 bags; 3/4 Pallet 72 bags.
  • Blazers Fuel Logs have been produced in our state of the art factory situated on the edge of the Snowdonia National Park for over 20 years. We e only make our logs with 100% virgin wood residue from British sawmill activity. All the wood comes from sustainably managed UK forests and is FSC ® certified. The Blazers Fuel Logs burn with a lovely natural flame in your open fire or wood burning stove, and give off a tremendous amount of heat (≥5.5kwh). They are less than 12% moisture and as such do not spark or spit when burning and leave a tiny amount of ash. All this means you hardly ever have to empty the ash pan and your chimney will stay cleaner for a lot longer than when burning traditional wood or coal.

Please note the single bag variation of this product is an additional product and does not qualify for free local delivery if purchased in an order less than £175 in value.




Please note when using Blazers in an enclosed stove that as the fuel is extremely dense it will expand in the firebox. Use the fuel logs sparingly as they contain a lot of heat.

An unusual use for Blazer Fuel Logs !

The National Trust Steam Powered Gondola on Coniston Water uses Blazer Fuel Logs for steam generation.

Look no smoke!


We can deliver this product free of charge to the following postcodes when part of a minimum order of £175:

  • CA
  • DG
  • TD

Nationwide pallet delivery is available for this product.

It is the customer’s responsibility to ensure that a pallet carrier can access the specified address. The site needs to be reasonably level as our pallets often weigh well over a tonne. The access needs to have minimum width of 2.8 metres and 5 metres headroom. The driver will have a small pallet truck to move the pallet off the tail lift but this will not operate over uneven or soft ground or gravel.

The delivery location must normally be able to accept vehicles up to 26 tonnes. However, if you advise us, we can instruct the delivery company to send a smaller vehicle. If you require a vehicle of 7.5 tonnes due to recent changes (weight restrictions on unloading) any pallets ordered will be required to be processed as half pallets instead of full pallets, so will incur added delivery charges.

Please contact us on 01768 896 634 before placing your order if your delivery address can not facilitate a large vehicle.

This product is available to collect in person from:

Cumbria Green Fuels
Unit 1 Blacksmiths Yard
Low Hesket

You may also like…